Canadian Flag Blowing In The Wind Ron Leclerc Zenith CH701 Construction Log


Zenair CH701 STOL Aircraft...
CH701 STOL

Winnipeg

Home Page...

Project Page...

Factory Page...

Tips & Tricks Page...

Rudder Page...

Horizontal Stabilizer Page...

Elevator Page...

Wings Page...

Flaperons Page...

Front Fuselage Page...

Rear Fuselage Page...

Firewall Page...

Landing Gear Page...

Instrument Panel Page...

Instrument Panel Page...

Controls Page...

Electrical Page...

Fuel System Page...

Engine Page...

Engine Page...

Engine Page...

Engine Page...

Tools Page...

Tools Page...

FAQ Page...

Local Weather Page...

Click for Winnipeg, Manitoba Forecast

Search My Site

Zenith Aircraft Co.

This site has no affiliation with Zenair or The Zenith Aircraft Company...

Sign Guest Book My Guest Book


Disclaimer:
The use of information from this web site is experimental
in nature, for educational purposes and is USED AT YOUR OWN RISK!

Click to join AirVW-Eng-Builders
Click to join
AirVW-Eng-Builders

Click to join flyfloatbuilders
Click to join
FlyFloatBuilders

Visit Zenith Aircraft
Builders and Flyers

Metric Converter

mm
ft
in

Note:
1 in = 25.4 mm
1 ft = 304.8 mm
1 ft = 12 in

 
 
Page 3
VW Type 4 Engine:    Previous...   1 | 2 | 3 | 4 | 5 |   Next...
 

Balance 2L Rods and K.B Pistons & Gap Rings
 
Click for larger view...

July 25, 2012
#1 - 96mm K.B Piston and 2L Rod(#612) balance -1301.6 grams

Click for larger view...

July 25, 2012
#3 - 96mm K.B Piston and 2L Rod(#380) balance -1301.5 grams


The #1 and #3 piston and rod are horizontally opposed and are in balance to within 0.50 grams!

 
Click for larger view...

July 25, 2012
#2 - 96mm K.B Piston and 2L Rod(#473) balance -1302.2 grams

Click for larger view...

July 25, 2012
#4 - 96mm K.B Piston and 2L Rod(#717) balance -1301.8 grams


The #2 and #4 piston and rod are horizontally opposed and are in balance to within 0.50 grams!

 
Click for larger view...

July 25, 2012
Gap 96mm Rings for K.B Pistons - Ring gap is 0.0065" per piston diameter = 0.0065 x 96/25.4 = 0.0246" minimum! 0.007 x 96/25.4 = 0.0265" maximum or Ring Gap is 0.025 -0/+007

 

VW Type 4 Engine Parts Cont.
 
Click for larger view...

September 10, 2012
VW Type 4 Engine Case Painted - Used Rustoleum Flat Black enamel combined with 50% Gas!

Click for larger view...

September 10, 2012
VW Type 4 engine Big Bore - 96mm Jugs Painted!

Click for larger view...

September 10, 2012
VW Type 4 engine - Painted Valve Covers/Bales, Lower Inspection Cover, Lower Sump Screen Cover and Nut!

 
Click for larger view...

September 10, 2012
VW Type 4 engine - Painted Bottom Tin... This is all of the tin used from the Type 4 Engine!

Click for larger view...

September 17, 2012
VW Type 4 Alternator Pulley - specific design, attaches to the Stock Type 4 fan hub.

Click for larger view...

September 17, 2012
VW Type 4 Remote Oil Cooler - attachment for input and output oil lines to and from the Remote Oil Cooler. Installs on the bottom of the Stock Type 4 Engine Oil Filter Flange.

 
Click for larger view...

September 17, 2012
VW Type 4 Remote Oil Cooler - attachment for input and output oil lines to and from the Remote Oil Cooler. Installs on the bottom of the Stock Type 4 Engine Oil Filter Flange.

Click for larger view...

September 17, 2012
VW Type 4 - Stock Oil Cooler block off plate... used with the Mesa Remote Oil Cooler!

 

 
Page 3
VW Type 4 Engine:    Previous...   1 | 2 | 3 | 4 | 5 |   Next...
 
Air Mail...


Home ][ Favorite Links ][ Local Weather ][ FAQ ][ E-Mail
Copyright© 2008-2015 Ron Leclerc CH701 Project
WebMaster