Canadian Flag Blowing In The Wind Ron Leclerc Zenith CH701 Construction Log


Zenair CH701 STOL Aircraft...
CH701 STOL

Winnipeg

Home Page...

Project Page...

Factory Page...

Tips & Tricks Page...

Rudder Page...

Horizontal Stabilizer Page...

Elevator Page...

Wings Page...

Flaperons Page...

Front Fuselage Page...

Rear Fuselage Page...

Firewall Page...

Landing Gear Page...

Instrument Panel Page...

Instrument Panel Page...

Controls Page...

Electrical Page...

Fuel System Page...

Engine Page...

Engine Page...

Engine Page...

Engine Page...

Tools Page...

Tools Page...

FAQ Page...

Local Weather Page...

Click for Winnipeg, Manitoba Forecast

Search My Site

Zenith Aircraft Co.

This site has no affiliation with Zenair or The Zenith Aircraft Company...

Sign Guest Book My Guest Book


Disclaimer:
The use of information from this web site is experimental
in nature, for educational purposes and is USED AT YOUR OWN RISK!

Click to join AirVW-Eng-Builders
Click to join
AirVW-Eng-Builders

Click to join flyfloatbuilders
Click to join
FlyFloatBuilders

Visit Zenith Aircraft
Builders and Flyers

Metric Converter

mm
ft
in

Note:
1 in = 25.4 mm
1 ft = 304.8 mm
1 ft = 12 in

 
 
Page 1
701 Wings:   1 | 2 | 3 | 4 |    Next...
 

Wing Forming Blocks...

Click for larger view...

June 5, 2007
Flanging Dies... 3 sizes, 65mm, 95mm & 115mm made out of plywood and oak. Go to the tools page for construction procedures...

Click for larger view...

June 24, 2007
Wing Rear Rib Forming Block...

Click for larger view...

June 24, 2007
Wing Nose Rib Forming Block...

 
Click for larger view...

June 24, 2007
Wing Root Rib Forming Blocks...

Click for larger view...

June 24, 2007
Wing Rear Rib Mounting Jig...

 

7V6-1 Heavy Rear Channels - 4 Required(2 left & 2 right)...

Click for larger view...

September 26, 2008
Heavy Rear Channel - Root Rib to Rib #1...
Parts - 7V4-3 Rear Root Doubler(0.090)
7V6-1 HD Rear Channel(0.032)
7V6-3 Rear Rib Angle(0.025)

Click for larger view...

September 26, 2008
Heavy Rear Channel - Rib #3 to Rib #4...
Parts - 7V6-1 HD Rear Channel(0.032)
7V6-3 Rear Rib Angle(0.025)

Click for larger view...

September 26, 2008
7V6-1 Completed Heavy Rear Channels - Left Wing

 
Click for larger view...

September 26, 2008
7V6-1 Completed Heavy Rear Channels - Right Wing

 

701 Wing Parts!

Click for larger view...

June 16, 2008
7V3-2SP Wing Spar Root Doubler 0.032 6061 Aluminium.
Required 1L + 1R...

Click for larger view...

September 26, 2008
7V1-1 Wing Nose Rib 0.025 6061 Aluminium.
Required 7L + 7R...

Click for larger view...

September 26, 2008
7V1-2 Wing Rear Rib 0.025 6061 Aluminium.
Required 7L + 7R...

 
Root Nose Rib

Click for larger view...

February 7, 2009
7V4-1 Root Nose Rib Pattern. Had to make this pattern to get the aluminum blanks cut just right...

Click for larger view...

February 7, 2009
7V4-1 Root Nose Rib forming block. This part is hard to make. Had to take 2 cracks at making the forming block before I got it right... yet is is quite simple to make...

Click for larger view...

February 7, 2009
7V4-1 Root Nose Rib... 0.025 6061 Aluminium Blanks.
Required 1L + 1R...

 
Click for larger view...

February 7, 2009
7V4-1 Root Nose Rib blank formed into an actual part...

Click for larger view...

February 7, 2009
7V4-1 Root Nose Rib formed into a left and right part. Lots of work for just 2 parts... one of the most difficult times in making this part was having to do it twice...

 

 
Page 1
701 Wings:   1 | 2 | 3 | 4 |    Next...
 
Air Mail...


Home ][ Favorite Links ][ Local Weather ][ FAQ ][ E-Mail
Copyright© 2008-2015 Ron Leclerc CH701 Project
WebMaster